#HTE
The Pope’s Bodyguards Get 3D-Printed Helmets
The Pontifical Swiss Guard is basically the Pope’s Secret Service. Responsible for the safety of the Pope, these are recruits from the Swiss Armed Forces who must meet the following criteria:
- Must be Swiss Catholic
- Must be an unmarried male
- Must be between 19 and 30 years of age
- Must be okay with conducting their duties while wearing Renaissance-era garb
That last part might be kind of tricky but hey, that’s the job. In addition to the colorful clothes, the 110 members of the PSG also wear ceremonial helmets from Renaissance times. These weigh 4.4 pounds and are hand-forged out of metal. The problem is that during warm weather, the helmets can get so hot that they’ll actually leave blisters on the Guards’ ears, so a modern upgrade was needed.
That’s why the PSG are now wearing these spiffy things, delivered last month:
Same great 16th-century design, but these babies are 3D printed PVC, produced by digital fabricator Marcus Risi. According to SwissInfo,
To make one of the new helmets, the 16th-century original is scanned, and the digital data is reworked on a computer before being printed. It takes approximately one day to produce a new hat.
The new hi-tech helmets weigh just 570 grams, protect against ultraviolet rays and are fitted with air vents. But they are not cheap: each costs CHF900-1,000 ($911-1,012) to produce, though this is still cheaper than their predecessors, which also took almost 130 hours to make. The 3D printer makes a PVC helmet in one-sixth of that time.
https://www.core77.com/posts/83995/The-Popes-Bodyguards-Get-3D-Printed-Helmets